SIKA CORPORATION 51692478Click To Copy StuccoBond - 5 Gallon Pail

BASF Stuccobond is used as a surface applied bonding agent for cement plaster stucco For absorbent or porous substrates, such as brick or masonry, dilute STUCCOBOND 1:1 with water. For denser substrates, such as concrete or stucco, use the product as packaged. Apply STUCCOBOND on dampened substrates only. Apply STUCCOBOND evenly. Surface shall be uniformly coated, free from voids, pinholes or blisters. Protect from rain to prevent wash-off until stucco is applied. Allow to dry a minimum of 3 4 hours prior to implementation of system components. After 12 hours, the surface must be reprimed with STUCCOBOND. Tinted light green Cement stable Applies easily with brush, roller or sprayer Low odor, low toxicity, VOC compliant Facilitates coverage Effective as a primer Fast and efficient implementation Environmentally safe;easy clean up with water Ambient and surface temperatures during implementation must be above 4 degree C (40 degree F) until dry. All surfaces must be clean, dry, and free of dust, grease and contaminants. New concrete, stucco, and masonry must be clean and cured a minimum of 28 days. Agitate or shake contents before beginning implementation procedure. To verify the most current version of this data guide is being used, visit www.wallsystems.basf.com or call BASF Wall Systems Technical Service Department (1-800-589-1336). Proper implementation is the responsibility of the user. Clean tools with water immediately after use. This product can expose you to chemicals including Methanol, which are known to the State of California to cause Cancer and Reproductive Harm.