RECENTLY VIEWED
Skip to main content
DK Hardware Professional Tax Exempt? Net 30? - DK Net Terms
Roll over image to zoom in
30 Days Easy Return. We are the largest supplier of the most adaptable, personalized hardware in the industry. We work hard to ensure you're satisfied with our products.
WARNING: This Product May Contain Chemicals Known to the State of California to Cause Cancer or Reproductive Harm. To Learn More Visit P65Warnings.ca.gov
Features
- Zinc construction with a gray finish provides a stable tailpiece interface for SFIC cylinder assemblies used in commercial door hardware.
- Measures 1-1/2" in length, 1/2" in Width, and 1/4" height to fit within standard core housings while maintaining clearance for plug rotation and cams.
- Acts as the mechanical tailpiece that transfers core rotation to the lock mechanism, enabling latch or bolt movement during keyed operation.
- Compatible with SFIC series cylinders configured for 6-pin layouts and interchangeable core systems requiring a tailpiece link.
- Intended for keyed openings across facilities where interchangeable cores are serviced routinely and components must swap without rework.
- Installs within the core housing; verify orientation and engagement depth with the lock body before reassembly to ensure smooth travel.
- During rekeying or service, inspect edges for burrs, clean contact surfaces, and lubricate to maintain consistent action.
Configuration
Tailpiece
Approved for Commercial Use
Yes
Product Type
Cylinder Part/Accessory
Alternate Part Number-1
144772
Sub-Series
Q330-168
Manufacturer Parent
Allegion
Series
Parts/Accessories
For Cylinder Type
Small Format Interchangeable Core
Function Family
Part/Component
ADA Compliant
No
For Use With
W Series Small Format Interchangeable Core
Material
Zinc
Finish
GRAY
Overall Length
1-1/2" (38mm)
Overall Length
1-1/2" (38mm)
Overall Width
1/2" (13mm)
Overall Height
1/4" (6mm)
Product Overview
This tailpiece is designed for SFIC series cylinders to translate core rotation into latch or bolt movement within the lock body. Built from zinc with a gray finish, it is dimensioned at 1-1/2" length, 1/2" width, and 1/4" height to fit common core housings while preserving clearance for rotational parts. The component supports 6-pin interchangeable core configurations and installs by confirming orientation and engagement depth before reassembly. Supplied as a single part, it reuses the host cylinder’s hardware. Routine inspection during rekeying helps maintain consistent operation across serviced openings.