CRL SW30 Spanner Wrench for Stainless Steel Standoffs

Item #: SW30 by CR Laurence

See reviews

In Stock $56.81 /each

SAVE UP TO 5.68

Buying in bulk

Roll over image to zoom in

CRL SW30 Spanner Wrench for Stainless Steel Standoffs

Item #: SW30 by CR Laurence

See reviews See reviews

In Stock $56.81 /each

SAVE UP TO 5.68

Buying in bulk

QUICK SHIPPING*

Usually ships in 1 business day

QTY
+
+ Add to Wishlist

Shop with Confidence

30 Days Easy Return. We are the largest supplier of the most adaptable, personalized hardware in the industry. We work hard to ensure you're satisfied with our products.

  • Designed to Work Only with Our Cat. No. SS30 Standoffs

Material

Stainless Steel

This CR Laurence stainless steel standoff assembly is exceptionally famous in engineering applications to secure a lite of glass to a strung metal section or segment without the utilization of a casing. The glass is manufactured with the required openings, and after that secured with the standoff to make a frameless appearance. The cat. No. SW30 spanner wrench is utilized to secure the cap assembly to the standoff base. The stainless steel standoff is intended to be utilized with boards going as a part of thickness from 1/4" to 1/2" (6.3 to 12.7 mm). The most extreme prescribed board size for 1/2" (12 mm) glass is 39" x 79" (990 x 2006 mm), with a greater weight for each connection purpose of 55 lbs. (25 kg). A 5/8" (16 mm) penetrated opening is required for establishment. NOTE: The SS30 Standoff is not compatible with other CRL Standoff Systems. The SS30 Standoff Assembly Consists of: 1 Cap - 1/4" (6.3 mm) Thick 1 Base - 3/8" (9.5 mm) Thick 1 Allen Screw - M8 Metric Thread x 1-3/4" (44 mm) Long 2 Vinyl Washers - 1-3/16" (30 mm) Diameter 1 Vinyl Sleeve - 3/16" (5 mm) Long. NOTE: Due to the diversity of applications, weight limitations for Standoff Systems are dependent upon wall or substrate anchoring and material strengths.

From Manufacturer

This CRL Stainless Steel Standoff Assembly is very popular in architectural applications to secure a lite of glass to a threaded metal bracket or column without the use of a frame. The glass is fabricated with the required holes, and then secured with the Standoff to create a frameless appearance. The Cat. No. SW30 Spanner Wrench is used to secure the Cap Assembly to the Standoff Base.
The Stainless Steel Standoff is designed to be used with panels ranging in thickness from 1/4" to 1/2" (6.3 to 12.7 mm). The maximum recommended panel size for 1/2" (12 mm) glass is 39" x 79" (990 x 2006 mm), with a maximum weight per attachment point of 55 lbs. (25 kg). A 5/8" (16 mm) drilled hole is required for installation.
NOTE: The SS30 Standoff is not compatible with other CRL Standoff Systems.
The SS30 Standoff Assembly Consists of:
1 Cap - 1/4" (6.3 mm) Thick
1 Base - 3/8" (9.5 mm) Thick
1 Allen Screw - M8 Metric Thread x 1-3/4" (44 mm) Long
2 Vinyl Washers - 1-3/16" (30 mm) Diameter
1 Vinyl Sleeve - 3/16" (5 mm) Long.
NOTE: Due to the diversity of applications, weight limitations for Standoff Systems are dependent upon wall or substrate anchoring and material strengths.