Roll over image to zoom in
Product Features
Product Overview
Related Videos
Reviews
Questions & Answers
Toggler TA3001S SnapSkru Self-Drilling Drywall Regular Anchors with Screws
Item #: TA3001S by Toggler
See reviews See
reviews
QTY
–
+
+ Add to Wishlist
Buy in Bulk & Save - See How
Watch Now
30 Days Easy Return. We are the largest supplier of the most adaptable, personalized hardware in the industry. We work hard to ensure you're satisfied with our products.
- Audible "Pop" Indicates Correct Install
- More Holding Power
- Works in 3/8", 1/2" or 5/8" (10, 13 or 16 mm) Thick Drywall
Wallboard Thickness
3/8" (10 mm) / 1/2" (13 mm) / 5/8" (16 mm)
SnapSkru® Regular
57 lbs. (25.8 kg) / 79 lbs. (35.8 kg) / 135 lbs. (61.2 kg)
SnapSkru® MINI
57 lbs. (25.8 kg) / 65 lbs. (29.5 kg) / 95 lbs. (43 kg)
Screw Size
8 x 1-1/2
Type
SnapSkru® Regular with Screws
Brand
Snap Skru®
Includes Fastener
Yes
CRL Toggler® SnapSkru® Self-Drilling Anchors are designed to preserve drywall integrity at installation as well as when the item and screw are removed. These Anchors work with a range of screw sizes – MINI: #6 (recommended) to #8, and Regular: #6 to #10, #8(recommended). Screws can be backed out and changed if needed without the Anchor coming out of the wall!
When activated with the minimum proper length screw: 1-1/4" (32 mm) for MINI and 1-1/2" (38 mm) for Regular, the Anchors open with an audible "pop", locking them in place in the wall or ceiling. They are easily installed with No. 2 Phillips screwdriver or bit, and resist vibration and shock. Maximum fixture thickness: 1/2" (13 mm) for MINI with 1-1/4" (32 mm) screw, and 3/4" (19 mm) for Regular with 1-1/2" (38 mm) screw. For thicker fixtures use longer screws.
HOLDING VALUES (ULTIMATE LOADS) - TENSILE (PULLOUT):
AnchorWallboard Thickness
3/8” (10 mm)Wallboard Thickness
1/2” (13 mm)Wallboard Thickness
5/8” (16 mm)SnapSkru® MINI57 Lbs. (25.8 kg)65 Lbs. (29.5 kg)95 Lbs. (43 kg)
SnapSkru® Regular57 Lbs. (25.8 kg)79 Lbs. (35.8 kg)135 Lbs. (61.2 kg)
Holding values are per anchor with #6 x 1-1/4" screw for MINI and #8 x 1-1/2" screw for Regular. Industry standard safe holding = 1/4 of ultimate load.
.