Von Duprin QEL-9827EO-F-4FT-26D-LBR-PR PR UNIT LBR LHR DBL EGRESS DR, Satin Chrome Pair

Pr Unit Lbr Lhr Dbl Egress Dr
9827-F Series Surface mounted vertical rod device

9827-F Fire exit surface mounted vertical rod device pairs of doors up to 8' x 10'(2438mm x 3048mm) , UL listed for fire exit hardware. Devices are ANSI A156.3 –2014 Grade 1. The 9827-F device has a smooth mechanism case. The surface vertical rod device is non-handed except when the following deviceoptions are used: SS (signal switch), and WS (Tornado/Hurricane). Vertical rod and latch guards are available to protectthe bottom rod of the exit device from damage by impacts of carts or gurneys passing throughdoors. Rod and latch guards can be used on hollow metal or tin clad composite fire doors.

Finishes – US3, US4, US10, US26, US26D, US28 , 313, US15 and US32D.

Specifications:

• Device functions: Device ships EO/DT/NL. Field selectable. For TP, K or L remove NL drive screw from device.
• Device lengths:
  • 2' 2' (610 mm) Door size
  • 3' 2'4' to 3' (711mm to 914 mm) Door size
  • 4' 2'10" to 4' (864 mm to 1219 mm) Door size
• Device centerline from finished floor:
• 39 5/8" (1006 mm)
• Center case dimensions:8" x 2 3/4" x 2 3/8" (203mm x 70mm x 60mm)
• Mechanism case dimensions:2 1/4" x 2 1/4" (57mm x 57mm)
• Projection:
• Pushbar neutral – 3 13/16" (97 mm)
• Pushbar depressed – 3 1/16" (78 mm)
• Latch bolt:Deadlocking anti-friction top and bottom bolt, 5/8" (16mm) throw
• Door undercut:1/4" (7mm) recommended
• Top and bottom latch case:4 1/2" x 2 1/8" x 1 1/2" (114mm x 54mm x 38mm)
• Vertical rods:1/2" square tubing, standard rods accommodate 7' (2134mm)doors. Top rod length: 34 15/16" (887mm); Bottom rod length:31 1/2" (794mm). Extension rods available in 3' (914mm) for doorsover 7'. One piece top rod is available for 8' (2438mm) and 10'(3048mm) doors.
• Fasteners and sex bolts (SNB):Includes screw pack for 1 3/4" (44mm) and 2 1/4" (57mm) thick metal or wood doors. and 325 SNB for top and bottom latch. Optional 425 SNB available.

Electric options

LX: Latchbolt monitor switch

RX: Pushpad monitor switch

• Signals use of an opening
• SPDT switch to monitor pushpad

RX2: Double pushpad monitor switch

E (E996L): Electrified breakaway lever

• Electrified remote locking/unlocking
• Standard in fail safe condition

EL: Electric latch retraction

• Enables remote unlatching
• Alternative to manual dogging

QEL: Quiet electric latch retraction

• Bolt retraction via switch
• Converts exit door to push-pull operation

SS: Signal switch

CX: Chexit delayed exit

• Meets NFPA 101 requirements
• Self-contained controls, locking, alarm

ALK: Alarm exit kit

• Unauthorized opening triggers 85-decibel horn
• Set in armed or disarmed mode by key

WP-RX: Waterproof request to exit

CON: Allegion Connectors

• Common connectors to connect various door hardware all the way to the power supply

Mechanical options

GBK: Glass bead kit

PN: Pneumatic latch retraction

• For areas where electrical devices banned
• Special linkage for mechanical or pneumatic dogging

LBR: Less bottom rod

WS: Tornado and hurricane tested

• Severe weater certified/tested
• FEMA and ICC compliant
• Tornado & hurricane tested

SNB: Sex bolts

SEC: Security screws

SLM: Special laminate material blocking

AX: Accessible device (LBR only)

Dogging/Strikes

• No mechanical dogging. EL and QEL option available.

Strikes: Top – 299F (499F LBR) Dull black, Bottom – 304L - Unfinished