White Glazing Compound - 3.5 Gallons

Roll over image to zoom in

DAP DAP12124 White Glazing Compound - 3.5 Gallons

Item #: DAP12124 by Dap

Item Discontinued!
See reviews See reviews
The item is currently out of stock and it may or may not be restocked
OUT OF STOCK

Shop with Confidence

30 Days Easy Return. We are the largest supplier of the most adaptable, personalized hardware in the industry. We work hard to ensure you're satisfied with our products.

  • Must Be Painted
  • Ready-to-use for Wood and Metal Sash
  • Smooth Creamy Consistency

Shipping Weight

65 lb (29.48kg)

Size

3.5 Gallons (13 l)

Brand

Dap

Finish

White

CRL DAP® '33'® Glazing Compound is smooth and flexible, and comes ready-to-use for face glazing wood and metal window frames. Its adhesion to both glass and sash is excellent, forming a dependable air and watertight seal that resists sagging, shrinking, chalking, and cracking.
SURFACE PREPARATION & APPLICATION
Separation occurs in glazing Putty; mix entire contents of container until completely uniformed before the application. If necessary, roll into coils to warm and soften.
  • *Surfaces should be clean, dry, and free of frost. When re-glazing, remove all old putty and bedding.
  • *Wood sash that is not primed or painted must be primed first with an oil-based primer and allowed to dry. When re-glazing, remove all old putty and bedding.
  • * Apply a thin layer of DAP® ‘33'® Glazing (about 1/8" thick) to backstop of sash to provide back-bedding where glass is to be set.
  • * For metal sash, use spacer shims at quarter points to maintain 1/8" minimum bedding thickness. There should be no metal or wood to glass contact.
  • *Smooth glazing to an angle that sheets water with a putty knife.
  • *Typical dry time before painting is one to two weeks, depending on temperature and humidity.
  • *Putty must be painted after it has skinned over and attained a firm set. Typical dry time before painting is one to two weeks, depending on temperature and humidity.
  • *For best results, use a high quality oil-based paint, or if using a latex paint, prime first with a high quality oil-based primer.
  • Important Notes: Important Note:
  • *Do not thin glazing compound.
  • *Do not apply when air or sash temperatures are below 40ºF (4ºC).
  • *Do not use on plastic window panes, insulating glass units with an organic seal, any window pane over 48" (1.22 m) in length, or metal sash with rabbets over 1-1/4" (32 mm) wide.
  • *Also not recommended for stained/leaded glass projects.
  • *Clean tools immediately after use with mineral spirits.