RECENTLY VIEWED
Skip to main content
CRL DAP '33' Glazing Compound is smooth and flexible, and comes ready-to-use for face glazing wood and metal window frames. Its adhesion to both glass and sash is excellent, forming a dependable air and watertight seal that resists sagging, shrinking, chalking, and cracking.
SURFACE PREPARATION & APPLICATION
Separation occurs in glazing Putty; mix entire contents of container until completely uniformed before the application. If necessary, roll into coils to warm and soften.
*Surfaces should be clean, dry, and free of frost. When re-glazing, remove all old putty and bedding.
*Wood sash that is not primed or painted must be primed first with an oil-based primer and allowed to dry. When re-glazing, remove all old putty and bedding.
* Apply a thin layer of DAP 33 Glazing (about 1/8" thick) to backstop of sash to provide back-bedding where glass is to be set.
* For metal sash, use spacer shims at quarter points to maintain 1/8" minimum bedding thickness. There should be no metal or wood to glass contact.
*Smooth glazing to an angle that sheets water with a putty knife.
*Typical dry time before painting is one to two weeks, depending on temperature and humidity.
*Putty must be painted after it has skinned over and attained a firm set. Typical dry time before painting is one to two weeks, depending on temperature and humidity.
*For best results, use a high quality oil-based paint, or if using a latex paint, prime first with a high quality oil-based primer.
Product Warning:
DK Hardware Professional Tax Exempt? Net 30? - DK Net Terms
Roll over image to zoom in
Product Features
Product Overview
Related Videos
Reviews
Questions & Answers
DAP 33QTW White '33 ft Glazing Compound - Quart
Item #: 33QTW by Dap
See reviewsSee reviews
QTY
–
+
+ Add to Wishlist
Buy in Bulk & Save - See How Watch Now
30 Days Easy Return. We are the largest supplier of the most adaptable, personalized hardware in the industry. We work hard to ensure you're satisfied with our products.
Features
- Must Be Painted
- Ready to Use for Wood and Metal Sash
- Smooth Creamy Consistency
Shipping Weight
6 lb (2.72kg)
Size
Quart (946 ml)
Brand
DAP® '33'®
Finish
White
Contents
32
For Use On
Wood And Metal Sash
Texture
Smooth Creamy Consistency
Finish/Color
White
Product Overview
CRL DAP '33' Glazing Compound is smooth and flexible, and comes ready-to-use for face glazing wood and metal window frames. Its adhesion to both glass and sash is excellent, forming a dependable air and watertight seal that resists sagging, shrinking, chalking, and cracking.
SURFACE PREPARATION & APPLICATION
Separation occurs in glazing Putty; mix entire contents of container until completely uniformed before the application. If necessary, roll into coils to warm and soften.
Product Warning:
- Do not thin glazing compound.
- Do not apply when air or sash temperatures are below 40 F (4 C).
- Do not use on plastic window panes, insulating glass units with an organic seal, any window pane over 48" (1.22 m) in length, or metal sash with rabbets over 1-1/4" (32 mm) wide.
- Also not recommended for stained/leaded glass projects.
- Clean tools immediately after use with mineral spirits.
Most shipping weights are approximate and have not been verified. If the exact weight is needed in order to determine shipping costs, and shipping costs are required in order for you to complete your order, please request this prior to submitting your order by contacting CRL Customer Service. Product images shown are of the actual product or a close representation. Colors can vary depending on your computer's video card and on how your monitor's color is adjusted.