RECENTLY VIEWED
Skip to main content
CRL SPS Overhead Track and Access Splices are 6063-T6 Alloy Aluminum, and are designed to accommodate the heavier loads required in stacking system installations. Two configurations, three lengths, and two finishes are carried in stock for immediate shipment. Lengths requiring cladding require 5 to 7 working days to fabricate. All lengths are pre-drilled at 24" (610 mm) on center for 3/8" (10 mm) fasteners. Contact Technical Sales Department for additional information.
Product Warning:
STRUCTURAL DISCLAIMER - All customers who in any way utilize this product are solely responsible to consult a structural engineer to determine the suitability of the product for the intended use and site conditions. All installers must be qualified and have professional knowledge about compliance with local, state and federal regulations, safety factors, and the appropriate choice of fixing material and procedures.
Each Splice is provided with four each 12" (305 mm) sliding keys to aid in aligning and securing the splice in place, and to allow for future roller removal if necessary. Splices should be located in front of the first parking intersection.
DK Hardware Professional Tax Exempt? Net 30? - DK Net Terms
Roll over image to zoom in
Product Features
Product Overview
Related Videos
Reviews
Questions & Answers
SPS S90120W White Standard Overhead Track - 120"
Item #: S90120W by CR Laurence
See reviewsSee reviews
QTY
–
+
+ Add to Wishlist
Buy in Bulk & Save - See How Watch Now
30 Days Easy Return. We are the largest supplier of the most adaptable, personalized hardware in the industry. We work hard to ensure you're satisfied with our products.
Features
- Available in Mill Aluminum or White Powder Paint Finishes (Cladding on Special Order)
- Available in Two Stock Lengths 120" (3.05 m) and 240" (6.10 m), Plus Splices for Roller Access
- Fabricated Corners and Intersections
- Standard Track – for Almost Any Installation
- Track is Pre-Drilled for 3/8" (10 mm) Fasteners at 24" (610 mm) Center-to-Center Spacing
Length
120" (3.05 m)
Type
Overhead Track - 120"
Finish
Gloss White
Track Length
120
Material
Aluminum
Finish/Color
Gloss White
Product Overview
CRL SPS Overhead Track and Access Splices are 6063-T6 Alloy Aluminum, and are designed to accommodate the heavier loads required in stacking system installations. Two configurations, three lengths, and two finishes are carried in stock for immediate shipment. Lengths requiring cladding require 5 to 7 working days to fabricate. All lengths are pre-drilled at 24" (610 mm) on center for 3/8" (10 mm) fasteners. Contact Technical Sales Department for additional information.
Product Warning:
STRUCTURAL DISCLAIMER - All customers who in any way utilize this product are solely responsible to consult a structural engineer to determine the suitability of the product for the intended use and site conditions. All installers must be qualified and have professional knowledge about compliance with local, state and federal regulations, safety factors, and the appropriate choice of fixing material and procedures.
Each Splice is provided with four each 12" (305 mm) sliding keys to aid in aligning and securing the splice in place, and to allow for future roller removal if necessary. Splices should be located in front of the first parking intersection.
Most shipping weights are approximate and have not been verified. If the exact weight is needed in order to determine shipping costs, and shipping costs are required in order for you to complete your order, please request this prior to submitting your order by contacting CRL Customer Service. Product images shown are of the actual product or a close representation. Colors can vary depending on your computer's video card and on how your monitor's color is adjusted.