Roll over image to zoom in
Product Features
Product Overview
Related Videos
Reviews
Questions & Answers
CRL ALUM-E010DVS-VCP-1 Wood's Dual Vacuum System
Item #: ALUM-E010DVS-VCP-1 by CR Laurence
Item Discontinued! See reviews See
reviews
The item is currently out of stock and it may or may not be restocked
OUT OF STOCK
30 Days Easy Return. We are the largest supplier of the most adaptable, personalized hardware in the industry. We work hard to ensure you're satisfied with our products.
- For DC-Powered Vacuum Systems
- Reduces the Risk of Dropping Loads
F.O.B
Laurel, MT.
WARNING
This product can expose you to LEAD, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov
Brand
Wood's Powr-Grip
Works On
DC-Powered Vacuum Systems
The CRL Wood's Dual Vacuum System is available for many of Wood's below-the-hook vacuum lifters that are equipped with a DC-powered vacuum system. It features two vacuum line circuits, which allow the lifter to maintain the vacuum level for one circuit even if an unexpected vacuum loss occurs in the other one. This option is designed to reduce the risk of falling loads, which could result from breakage or other accidents that compromise one area of the vacuum system. If the vacuum lifter were to experience a leak in one vacuum circuit, vacuum pads in the second circuit would continue to grip the load until it could be lowered safely to the ground. In addition, the Dual Vacuum System features audible and visible alarms that warn the operator whenever the vacuum level is not sufficient for lifting the maximum load weight. Although the Dual Vacuum System was originally designed to comply with the European safety standard EN 13155, it provides additional security in any setting where this is desired.
NOTE: Must be ordered at time of lifter purchase.
.