Wood's Powr-Grip DC Model P2 Two Channel 4-1/2' Spread Vacuum Lifting Frame - For Flat Material

Roll over image to zoom in

CRL P2110445DC Wood's Powr-Grip DC Model P2 Two Channel 4-1/2' Spread Vacuum Lifting Frame - For Flat Material

Item #: P2110445DC by Wood's Powr-Grip

Item Discontinued!
See reviews See reviews
The item is currently out of stock and it may or may not be restocked
OUT OF STOCK

Shop with Confidence

30 Days Easy Return. We are the largest supplier of the most adaptable, personalized hardware in the industry. We work hard to ensure you're satisfied with our products.

  • Load Capacity 1400 Lbs. (635 Kg)
  • 180 Degree Edgewise Rotation
  • 90 Degree Tilt, Vertical to Flat
  • Big 11" (280 mm) Diameter Vacuum Pads
  • Weekly Rental or Lease to Purchase Plans Available

Lifting Capacity

1400 lb (635 kg)

Pad Spread Size

51X 54.25

F.O.B

Laurel, MT.

Brand

Wood's Powr-Grip

WARNING

This product can expose you to LEAD, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov

Load Capacity

1400

Pad Quantity

8

Rotation (Degrees)

180

Tilt Angle (Degrees)

90

Tilt Angle

90°


Channel Lifters are comprised of one or more Pad Channels and interchangeable Lift Frames for manually rotating and tilting materials. They may be ordered as complete units or as individual components to expand existing Channel Lifter systems. Lift Frames are available in single-channel or double-channel styles. Pad Channels can be switched from one frame to another in minutes.
Standard Pad Spread:
CAT. NO. P2110445DC: 51" x 54-1/4" (1.30 x 1.38 m)
CAT. NO. P2HV110445DC: 50" x 53-1/4" (1.27 x 1.35 m)
Number/Size of Pads:
CAT. NO. P2110445DC: 8/11" (280 mm) Diameter Lipped
CAT. NO. P2HV110445DC: 8/10" (254 mm) Diameter Lipped
Lifting Capacity:
CAT. NO. P2110445DC: 1400 Lbs. (635 kg)
CAT. NO. P2HV110445DC: 1200 Lbs. (545 kg)
(on smooth, non-porous surfaces. Call for recommendations on other surfaces.)
Average Unit Weight: 171 Lbs. (78 kg)
Standard Operating Power: 12V DC, 10 AMP (for each Pad Channel).
Load Movement: Manual rotation, 180 degree edgewise, with locking in three positions. Manual tilt, 90 degree between upright and flat, with automatic latching in upright position. (Units can be tilted ONLY when the lift bar is locked in the center position, as shown in drawings.)
Standard Features:
On-Board Battery and Charger
Battery Energy Gauge
Low Vacuum Warning Light
Vacuum Gauge
Vacuum Line Filter
Vacuum Reserve Tank
AVAILABLE OPTIONS:
For All P2 Series Channel Lifters:
  • AC Power System
    CAT. NO. P2110445AC
    CAT. NO. P2HV110445AC
    CAT. NO. P211047AC
    CAT. NO. P2HV11047AC
  • Remote Control System CAT. NO. E08RC
  • Removable Control Pendant CAT. NO. E09RP
  • Dual Vacuum System CAT. NO. E010DVS
  • Individual Pad Shutoffs CAT. NO. CM1C0WB
  • Closed Cell Foam Pad Rings CAT. NO. FRHV11 (available on P2HV1104 units only.)
  • Counter-Balancer CAT. NO. CB1S
    COMPONENTS:
    Pad Channels:
    Each channel features an independent, on-board vacuum generating system, including vacuum pump, vacuum controls and standard features as listed above.
  • CAT. NO. PC1104 (for Flat Materials): 4/11" (280 mm) Diameter Lipped Pads
  • CAT. NO. PC1004 (for Curved Materials): 4/10" (254 mm) Diameter Concaved Pads
  • CAT. NO. PCHV1104 (for Rough Materials): 4/10" (254 mm) Diameter Lipped Pads Lift Frames
  • CAT. NO.PCFT1A1: For One Pad Channel
  • CAT. NO. PCFT2SA45: For Two Pad Channels, Approx. 4-1/2' (1.38 m) Pad Spread
  • CAT. NO. PCFT2SA7: For Two Pad Channels, Approx. 7' (2.14 m) Pad Spread Interchangeable Arms (Pad spread can be changed if optional arms are purchased.)
  • CAT. NO. FA245: Optional Arms Convert PCFT2SA7 Lift Frame to PCFT2SA45 Lift Frame
  • CAT. NO. FA27: Optional Arms Convert PCFT2SA45 Lift Frame to PCFT2SA7 Lift Frame
    CRL offers large Power Lifting Frames on a week to week rental basis. Customers are responsible for all common carrier freight charges and may require to provide a security deposit. Usage time is based on a one week minimum and begins on the day the frame arrives at the customer. Rental billing ends on the day the frame is shipped back to the originating point. Billing is for full weeks only, no partial weeks. For details, availability and actual pricing please contact CRL Customer Services.

    .