Von Duprin PS914 Base Power Supply (4A (16A inrush) @ 12/24 VDC field selectable)

PS9144 amp high in rush power supply

Von Duprin power supply and option board products were designed to meet the specific requirements of electrified fire exit devices.

Installation is simplified by utilizing a flat mounting design and polarized locking connectors for option boards. This design eliminates the need for racks and side connectors. The flat mounting of the option boards also provides for easier access to the terminal blocks for connection of electrified devices (such as electrified panic devices, strikes, card readers, etc.).

Common to the line of PS900 Series power supplies is a constant output rating at both 12v and 24v settings, universal 120 VAC to 240 VAC input, and polarized option board connectors. New fire alarm interface board mounting allows outputs to be configured as switched (power cut) or unswitched (power continues) when signal is provided.

Features:

• 4A @ 12/24 VDC constant output, field selectable with jumper

• Designed for use with electrified panic devices requiring high in rush current

• Provides low-voltage, Class 2, filtered and regulated power

• Universal 120-240 VAC, fused primary input

• Two polarized option board connectors

• AC input and DC output monitoring circuit with LED indicators

• Externally visible AC input indicator with isolated SPDT contacts

• High-voltage protective cover for AC circuitry

• Battery back-up board auto-selects voltage

• Optional Fire Alarm plug-in board available

• UL 294, ULC-S318, RoHS, and FCC Part 15 certified

Specifications: Input voltage:

• 120/240 VAC, 50/60 Hz, universal input

Output voltage:

• 4A @ 12 or 24 VDC
• Field selectable with jumper
• Switching supply, 5% regulation, 360mVpp max ripple

Enclosure:

• Grey/baked enamel
• 14" x 12" x 4" (H x W x D)
• Eight 1/2" x 3/4" knockouts
• Hinged cover with lock down screws

Operating temperature:

• 32° - 120°F (0° - 49°C)

Certifications:

• ANSI/UL 294
• ULC-S318
• RoHS
• FCC Part 15
• Class 2

Battery backup:

• 900-BB - Battery backup board only
• 900-BBK - Battery backup kit (backup board plus battery pack)

AC primary fuse size:

• 6.3A, 250v, 5 x 20mm

Battery fuse size:

• 7.5A 32v ATO blade style

DC output protection:

• Overload protection - current limited foldback circuit

Indicators:

• AC input - LED (visible on outside of enclosure)
• DC output - LED
• Isolated SPDT contacts to monitor AC power status

Weight (power supply):

• Approx. 9.0 lbs

Weight (each battery):

• 4.0 lbs

AC input termination:

• 3 position terminal block with protective cover
• Wire capacity: 10 AWG max

DC output termination:

• 2 position terminal block
• Wire capacity: 12 AWG max

Option board connectors:

• 2

Fire alarm board connector:

• Yes (requires connection on option board)

Keylock:

• Optional

Accessories:

• 900-BAT: Backup battery pack

Available option boards: 900-FA:

• Plug-in fire alarm (must be installed on option board)

900-2RS*:

• 2 Relay option board capable of individual or sequential operation for single and pair door applications

900-4R*:

• 4 Relay option board

900-4RL*:

• 4 Relay option board with integrated logic and individual or sequential operation capability for controlling security interlocks, auto operators and time delay function

900-8F*:

• Fused, 8 zone option board

900-8P*:

• PTC, 8 zone option board

• * Compatible with plug-in fire alarm board (900-FA)