Dorma® Model BTS80 8.5 Lb. Floor Mounted Door Closer Body in Cement Case has universal, non-handed design uses a system of interchangeable spindles, and allows one basic door closer mechanism to be used for either single or double acting, center-hung or offset applications while accommodating virtually any floor covering or threshold height. The selective, multi-point hold open or variable delayed action feature makes this one of the most versatile door closers available. Dorma® Model BTS80 8.5 Lb. Floor Mounted Door Closer Body in Cement Case has 54" (1372 mm) interior width and offers a 660 Lb. (299 kg) Capacity. It is able to satisfy almost every application requirement. Once installed below floor level, the mechanism is almost completely concealed from view. Specifications: Maximum Door Weight: 660 Lbs. (299 kg) Maximum Interior Door Width: 54" (1372 mm) Maximum Exterior Door Width: 48" (1219 mm) Notes: Accessories such as Cover Plates, Pivots, Center-Hung and Offset Arms are also available. This Door Closer is designed to open to a maximum of 180 degrees. An auxiliary floor or overhead stop is required to stop the door at less than 180 degrees. Closers set to comply with A.D.A. specified opening forces might not provide adequate spring power to control and close the door due to varying site conditions and door size. Closer Body Only. Spindle is not included. Spindles are available to accommodate different heights and types: CRL9040S, or CRL9050S. DS 06/28/2016
The
Dorma® BTS80 Series Floor Mounted Door Closers offer adaptability to almost any installation. The Dorma® Closer's compact body permits its use where a larger door closer would be prohibitive. The universal, non-handed design uses a system of interchangeable spindles, and will allow one basic door closer mechanism to be used for either single or double acting, center-hung or offset applications while accommodating virtually any floor covering or threshold height. The selective, multi-point hold open or variable delayed action feature makes this one of the most versatile door closers available. Accessories such as Cover Plates, Pivots, Center-Hung and Offset Arms are also available.
NOTE: This Door Closer is designed to open to a maximum of 180 degrees. An auxiliary floor or overhead stop is required to stop the door at less than 180 degrees.
SPECIFICATIONS:Maximum Door Weight: 660 Lbs. (299 kg)
Maximum Interior Door Width: 54" (1372 mm)
Maximum Exterior Door Width: 48" (1219 mm)Important Notes
Closers set to comply with A.D.A. specified opening forces might not provide adequate spring power to control and close the door due to varying site conditions and door size. Closer Body Only. Spindle is not included. Spindles are available to accommodate different heights and types: CRL9040S, or CRL9050S.