Arrow GL82SR 26D IC GL Series Cylindrical Lever Lock, Satin Chrome
Item #: GL82SR 26D IC by Arrow
In Stock $245.44 /each
Buying in bulk
Roll over image to zoom in
Arrow GL82SR 26D IC GL Series Cylindrical Lever Lock, Satin Chrome
Item #: GL82SR 26D IC by Arrow
In Stock $245.44 /each
Buying in bulk
30 Days Easy Return. We are the largest supplier of the most adaptable, personalized hardware in the industry. We work hard to ensure you're satisfied with our products.
- OverDrive™ – Freewheeling lever action occurs when latch retraction mechanism disengages from lever handle when handle is locked. Built-in stops in the rose insert prevent lever from traveling beyond approximately 70 degrees.
- Backset – 2-3/4" (69.85mm) standard. See price book for alternate backsets.
- Latch – Stainless Steel with 1/2" (12.7mm) throw standard. Latch housing is steel, zinc dichromate finish for corrosion resistance. 1" (25.4mm) bore in edge of door is required.
- Latch Front – Brass and stainless steel. 2-1/4" (57.15mm) x 1-1/8" (28.57mm), 1/8" (3.175mm) in 2" (50.8mm).
- Exposed Trim – Levers are pressure cast zinc. Streamline rose scalp of brass or bronze complements other series of lever locks.
- Rose Inserts – Contain coil spring which is a permanent assembly within rose insert. Inside and outside rose scalps are retained by dimples that create an interference fit with the rose inserts. There are no special retention features added to the rose insert that align the scalp.
- Strikes – Brass and stainless steel. ANSI A115.2, 4-7/8" (123.82mm) x 1-1/4" (31.75mm) curved lip strike standard.
- Door Thickness – 1-3/8" (34.92mm) to 2" (50.8mm).
- Handing – Non-handed. Levers operate bi-directionally.
- Finishes – US3, US10B, US26D.
- Packaging – 1 per box, 10 per case.
- Warranty – Limited five year warranty.
Grade
ANSI/BHMA Grade 1
Thickness
1-3/8" - 2"
Hand
Not Handed
Color
Satin Chrome
Color Code
626/US26D
Function
82-Storeroom
Cylinder Type
SFIC Less Core-Small Format Prep
Fire Rated
3 Hours {A}
Package Height
3.875"
Package Length
8.75"
Package Volume
250.0585938
Package Width
7.375"
ANSI Function
F86 - Storeroom
Bolt Protection
1/2"
Latch Backset Dim
2-3/4"
Latch Number
G71
Latch Type
Dead Latch (Guarded)
Lever/Knob Design
SR - Sierra
Lock Face Size
2-1/4" x 1-1/8"
Package Qty
1
Product Height
3.5625"
Product Length
4.75"
Product Width
3"
Rose/Escutcheon Design
3-9/16 In. Diameter
Screws
Combination
Special Marks
Small format interchangeable core, Fire rated 3 Hours {A}
Strike Height
4-7/8"
Strike Number
306
Strike Type
ASA
Strike Width
1-1/4"
Base Material
Brass or Bronze
Finish
Satin Chrome
Backset
2-3/4", 1-1/8" x 2-1/4", Square Corner
Finish Description
Satin Chrome
Lever Style
SR-Sierra
Rose/Escutcheon Trim
Round Rose
Product Type
Cylindrical Lock
Strike
ANSI, 1-1/4" x 4-7/8", 1-1/4" Lip, Square Corner
Projection
2.5313
Lever Length
4.2500
Door Thickness
1-3/4" - 2"
Bore Size
2.1250
ADA Approved
False
GL Series Cylindrical Lever Locks
Arrow GL Series Grade 1 heavy duty levers offer an economically pleasing solution for ADA compliance. The GL solution is designed with the installer in mind, providing fewer subcomponents to allow for an easier to install system. Simply put, the GL Series will be your number one choice when economy is your first priority.
Certification:
All Arrow GL Series locks are UL/cUL listed for use on 3 hour, A label or lesser doors and are certified to conform to the requirements of ANSI/BHMA A156.2, Series 4000, Grade 1.
- Federal Specification FF-H-106C
- ANSI A117.1 Accessibility Code
- California State Reference Code for levers returning to within 1/2" (12.7mm) of door surface
Features
- Housing- Interlocking lever tubes are made from dichromate plated steel. The tubes are attached to the rose insert. This offers fantastic support for a ridged feel without excess movement. Standard bearing sleeves used on most other Arrow lever series are not used on the GL. Requires standard 2-1/8" (53.97mm) bore through door.
- Thru-Bolts- Removable thru-bolts standard on GL Series
- OverDrive™- Freewheeling lever action occurs when latch retraction mechanism disengages from lever handle when handle is locked. Built-in stops in the rose insert prevent lever from traveling beyond approximately 70 degrees.
- Backset- 2-3/4" (69.85mm) standard. See price book for alternate backsets.
- Latch- Stainless Steel with 1/2" (12.7mm) throw standard. Latch housing is steel, zinc dichromate finish for corrosion resistance. 1" (25.4mm) bore in edge of door is required.
- Latch Front- Brass and stainless steel. 2-1/4" (57.15mm) x 1-1/8" (28.57mm), 1/8" (3.175mm) in 2" (50.8mm).
- Exposed Trim- Levers are pressure cast zinc. Streamline rose scalp of brass or bronze complements other series of lever locks.
- Rose Inserts- Contain coil spring which is a permanent assembly within rose insert. Inside and outside rose scalps are retained by dimples that create an interference fit with the rose inserts. There are no special retention features added to the rose insert that align the scalp.
- Strikes- Brass and stainless steel. ANSI A115.2, 4-7/8" (123.82mm) x 1-1/4" (31.75mm) curved lip strike standard.
- Door Thickness- 1-3/8" (34.92mm) to 2" (50.8mm).
- Handing- Non-handed. Levers operate bi-directionally
- Warranty- Limited five year warranty