RECENTLY VIEWED
Skip to main content
DK Hardware Professional Tax Exempt? Net 30? - DK Net Terms
Roll over image to zoom in
30 Days Easy Return. We are the largest supplier of the most adaptable, personalized hardware in the industry. We work hard to ensure you're satisfied with our products.
WARNING: This Product May Contain Chemicals Known to the State of California to Cause Cancer or Reproductive Harm. To Learn More Visit P65Warnings.ca.gov
Features
Material
Housing: Plastic, Front fixing brackets and support lever: Steel
Model
G
Installation
Fitting for screw fixing with pre-mounted Euro screw, The door mounts without tools and slides onto the front fixing plates Use a Pozi drive #2 for all screw installations
Lid Material
Wood
For lid height
650 mm
Model series
Free space 6.15
Adjustment facility
Height, side, tilting angle, holding power
Supplied with
2 fittings (right/left) 2 front fixing brackets with pre-mounted screws 1 set mounting instructions and paper drilling template
Installation height
183 mm
Order reference
We recommend using the stronger fitting model in the overlap area.
For cabinet height
350 – 650 mm
Area of application
for heavy stay flap applications up to 15 kg (with cabinet height of 600 mm), for standard applications, doors with handles not applicable for aluminum framed doors
Installation depth
2 7/8"
Color/Finish
Front fixing bracket: Nickel plated
Cover Color
Housing: Light gray, support lever: Nickel plated
Flap Type
one-piece
Opening Angle
90 ° or 107°
For cabinet width
≤1,800 mm
Important
Selecting the correct model depends on door height and then door weight which should also consider the weight of the handle. We recommend ordering the stronger fitting if in doubt.
For lid weight formula
≤18.9 kg, note sample measurements table and cabinet height
Efficiency factor range
4080 – 6,600
Colour cover text
Housing: Light gray, support lever: Nickel plated
Opening angle formula
90 ° or 107°
ArticleType
NORMAL
For lid height formula
650 mm
Adjustment facility multi-line text lang dep
Please use a Pozi Drive #2 bit for all screw installations and adjustments, otherwise damage to screw heads is likely. For door holding power adjustment, use a cordless driver as these screws are geared very low. Dor opening angle can be adjusted to 90° or 107° degrees.
For cabinet width formula
≤1,800 mm
Installation depth inches lang dep
2 7/8"
Colour finish multi-line
Lever arm: Nickel plated
For cabinet height formula
350 – 650 mm
Product Overview
Optional Accessories: P-01320366