316 Polished Stainless Sydney Series Glass-to-Glass Mount Hinge

Roll over image to zoom in

CRL SYD180PS 316 Polished Stainless Sydney Series Glass-to-Glass Mount Hinge

Item #: SYD180PS by CR Laurence

Item Discontinued!
See reviews See reviews
The item is currently out of stock and it may or may not be restocked

Shop with Confidence

30 Days Easy Return. We are the largest supplier of the most adaptable, personalized hardware in the industry. We work hard to ensure you're satisfied with our products.

  • Use Monolithic Tempered Glass
  • Choice of Two Mounting Options: Glass-to-Glass and Glass-to-Wall
  • Constructed of 316 Stainless Steel in Your Choice of Brushed or Polished Finish
  • Glass-to-Glass Model Has Settings at 90 Degrees or 180 Degrees
  • Opens Up to 90 Degrees Outwards; Settings at 90Degrees or 180 Degrees
  • Our Spider Type Design for the Construction of Frameless Showers

Shipping Weight

3 lb (1.36kg)






Polished Stainless Steel

Glazing Thickness

5/16, 3/8


Polished Stainless Steel

Maximum Door Width - 2 Hinges (Inches)


Maximum Door Width - 3 Hinges (Inches)


Maximum Door Weight - 3 Hinges (Pounds)


Maximum Door Weight - 2 Hinges (Pounds)


Glass To Glass Angle (Degrees)


Mounting Type

Glass To Glass


316 Stainless Steel

For a new design in CRL Frameless Shower Door Hinges, look no further than our Sydney Series. The unique Spider Type design is certain to give the frameless shower door a different look that will surely be noticed. Constructed of durable 316 stainless steel, Sydney Hinges are available in Wall-to-Glass and Glass-to-Glass models. The Glass-to-Glass model offers two settings at 90 degree and 180 degree. For doors falling in between these common installation angles, the springs may be removed to allow a free-swinging hinge.
Two holes are required per hinge for each panel to accommodate the through-bolts, with no cut-out necessary. The 316 stainless steel body of the Sydney Hinge allows the door to swing 90 degree outward. Polished and Brushed Stainless finishes are offered.
Using two hinges with 5/16" to 3/8" glass (8 to 10 mm) the hinge will hold up to 80 lbs. (36 kg) with a maximum door width of 28" (711 mm).
Using three hinges with 5/16" to 3/8" glass (8 to 10 mm) the hinge will hold up to 120 lbs. (54 kg) with a maximum door width of 34" (864 mm).
Glass Thickness: 5/16" to 3/8" (8 to 10 mm) Tempered Safety Glass
Construction: 316 Stainless Steel
Hinge Swings: Up to 90 degree Outwards (Requires Stop)
Closing Type: Precise Closing to 0 degree
Two 5/8" (16 mm) Diameter Holes required per panel per hinge, no cut-out.
Includes: Gaskets, Screws, and Glass Fabrication Dimensions. Spanner Wrench is not included
Product Warning:
CRL Shower Door Hinges are designed for residential or hotel shower use. If hinges are to be used for other than their intended purpose, approval must be obtained from the CRL Shower Door Technical Sales Department.
Use only the template included with this hinge. Cut-out dimensions for CRL hinges may not match those of other brands.


Most shipping weights are approximate and have not been verified. If the exact weight is needed in order to determine shipping costs, and shipping costs are required in order for you to complete your order, please request this prior to submitting your order by contacting CRL Customer Service. Product images shown are of the actual product or a close representation. Colors can vary depending on your computer's video card and on how your monitor's color is adjusted.

Stainless Steel Advisory: Although Stainless Steel is resistant to corrosion, it is not rust or stain proof. CRL recommends periodic maintenance to help maintain its factory finish. For more information, view the Stainless Steel Disclaimer found in the Technical References section below.