RECENTLY VIEWED
Skip to main content
DK Hardware Professional Tax Exempt? Net 30? - DK Net Terms
Roll over image to zoom in
Product Features
Product Overview
Related Videos
Reviews
Questions & Answers
Richelieu Hardware 50460124 LED 4 m/13 ft Tape Light Roll 24 V dc 58 W
Item #: 50460124 by Richelieu Hardware
See reviewsSee reviews
Use Code: SAVEBIG2025 for Extra 10% Off
30 Days Easy Return. We are the largest supplier of the most adaptable, personalized hardware in the industry. We work hard to ensure you're satisfied with our products.
Features
Finish
White
Watts
58 W
Maximum Length
13 ft (3.96 m) Max
Application
Kitchen, Living Room, Commercial, Furniture, Closet
Length
13 ft
Location
Inside Cabinet, Closet, Other
Lighting Type
LED
Group
LED Group G
Lighting
Accent
Standards and Certifications
ETL
Width
3/8 in
Features
Dimmable
Light Color
Neutral White
Luminous Flux
1440 Lumen
Mounting
Surface
Kelvin Color Temperature (K)
4000 K
Luminaire
Flexible Linear
Price Point
Elite
Tension (V)
24 V
Product Overview
Tape on a roll
Can be cut every 10 cm (3.94") or after every 6th LED.
Quick-connect options available.
Advantages And Benefits
Easy-clip system to connect two strips together: no need to use any additional screws!
Available in 3 different color temperatures:
- 3000 degree Warm White
- 4000 degree Neutral White
- 6000 degree Cool White
Direct Quick Connect available.
- Quick Connect connecting cables available in 4 lengths: choose from 2", 20", 40", and 79".
Application
Accent and perimeter lighting.
Included Product(S)
Includes one power cord starter lead with each roll.
Important Information
14.4 W per meter (3 ft)
Requires power cord if you are cutting the tape light roll to start a NEW run.
3 different lengths available with quick-connect feature: 20", 40" and 79", in black or white.
Power supply required, with 3 options to choose from:
- 2652412 = 2 ft max run
- 2651236 = 6 ft max run
- 2651260 = 13 ft max run
Disclaimer
One power cord to connect to power supply is included in each roll. If you need more power cords they are available separately.
Each LED tape light roll has 3M Adhesive tape on backside. You can affix the tape into position after you have measure and mark your installation location. You only have ONE CHANCE for correct installation if you try to unpeel the tape to reposition it, it will never fully adhere again. You will require additional 3M Adhesive, sold separately.
Be careful when you install the LED strip light on conducting surfaces, because the solder contact can cause a short circuit.
Avoid buckling the LED strip light because the PCB board can be damaged easily.
You can turn on the power supply in the final step when everything is set up.
Can be cut every 10 cm (3.94") or after every 6th LED.
Quick-connect options available.
Advantages And Benefits
Easy-clip system to connect two strips together: no need to use any additional screws!
Available in 3 different color temperatures:
- 3000 degree Warm White
- 4000 degree Neutral White
- 6000 degree Cool White
Direct Quick Connect available.
- Quick Connect connecting cables available in 4 lengths: choose from 2", 20", 40", and 79".
Application
Accent and perimeter lighting.
Included Product(S)
Includes one power cord starter lead with each roll.
Important Information
14.4 W per meter (3 ft)
Requires power cord if you are cutting the tape light roll to start a NEW run.
3 different lengths available with quick-connect feature: 20", 40" and 79", in black or white.
Power supply required, with 3 options to choose from:
- 2652412 = 2 ft max run
- 2651236 = 6 ft max run
- 2651260 = 13 ft max run
Disclaimer
One power cord to connect to power supply is included in each roll. If you need more power cords they are available separately.
Each LED tape light roll has 3M Adhesive tape on backside. You can affix the tape into position after you have measure and mark your installation location. You only have ONE CHANCE for correct installation if you try to unpeel the tape to reposition it, it will never fully adhere again. You will require additional 3M Adhesive, sold separately.
Be careful when you install the LED strip light on conducting surfaces, because the solder contact can cause a short circuit.
Avoid buckling the LED strip light because the PCB board can be damaged easily.
You can turn on the power supply in the final step when everything is set up.