RECENTLY VIEWED
Skip to main content
The Trento Hinge uses durable non-asbestos fiber (NAF) gaskets, compatible with both 3/8" and 1/2" (10 mm and 12 mm) monolithic tempered glass. This material adapts to help maintain a consistent grip between the hinge and glass across varying surface conditions.
STANDARD REVERSIBLE PIVOT PIN: Each Trento Hinge contains a Reversible Pivot Pin. The standard reversible pivot pin allows you to adjust the door s closed position. By rotating (not flipping) the pin, you can shift the self-centering angle by 5 degrees either 95 degree or 85 degree to ensure the door closes properly and aligns correctly with surrounding panels. This adjustment helps maintain a tight seal and smooth operation.
Using two hinges with 3/8" and 1/2" (10 mm and 12 mm) glass, the hinge can support doors up to 150 lbs. (68 kg) with a maximum width of 40" (1016 mm).
Using three hinges with 3/8" and 1/2" (10 mm and 12 mm) glass, the hinge can support doors up to 190 lbs. (86 kg) for doors up to 40" (1016 mm) wide.
Product Warning:
CRL Shower Door Hinges are designed for residential or commercial shower use. If hinges are to be used for other than their intended purpose, approval must be obtained from the CRL Shower Door Technical Sales Department.
Use only the template included with this hinge. Cut-out dimensions for CRL hinges may not match those of other brands.
DK Hardware Professional Tax Exempt? Net 30? - DK Net Terms
Roll over image to zoom in
Product Features
Product Overview
Related Videos
Reviews
Questions & Answers
CRL TNT074CH Polished Chrome Trento 074 Series Wall Mount Short Back Plate Hinge
Item #: TNT074CH by CR Laurence
Brand: CRL
See reviewsSee reviews
30 Days Easy Return. We are the largest supplier of the most adaptable, personalized hardware in the industry. We work hard to ensure you're satisfied with our products.
WARNING: This Product May Contain Chemicals Known to the State of California to Cause Cancer or Reproductive Harm. To Learn More Visit P65Warnings.ca.gov
Features
- High-performance Heavy-Duty Hinge
- Wall Mount Short Back Plate
- Modern rectangular design with concealed screws
- Single NAF gasket compatible with both 3/8" and 1/2" glass
- For use with monolithic tempered glass
Height
4 in. (102 mm)
Finish
Polished Chrome
Mounting Type
Wall Mount
Material
Brass Body with Stainless Steel Back Plate
Width
2-5/16 in. (58 mm)
Back Plate
Short
Glazing Thickness
3/8 in. To 1/2 in. (10 mm To 12 mm)
Maximum Door Width
40 in. (1016 mm)
Opening Style
Swing(side)
Enclosure Type
Corner, Niche, Bathtub, Tailor Made Solutions
Adjustable
No
Finish/Color
Polished Chrome
Series
Trento
Self-Centering
Yes
5 Degree Pre-Set
No
Positive Close
No
Maximum Door Weight - 2 Hinges
150 lbs. (68 kg)
Maximum Door Weight - 3 Hinges
190 lbs. (86 kg)
Maximum Clamping Screw Torque
60-70 lbf.in (677.9-791 cN.m)
Design Style
Square
Maximum Door Width - 1/2 Glass - 2 Hinges
150 lbs. (68 kg)
Maximum Door Width - 1/2 Glass - 3 Hinges
190 lbs. (86 kg)
Product Overview
TheCRL Trento Hingeis a heavy-duty hinge designed for modern frameless shower doors, supporting glass panels up to 150 lbs. in a standard two-hinge installation. It's sleek rectangular design with concealed mounting screws delivers a clean aesthetic that enhances the overall look of the shower enclosure without visible hardware.
The Trento Hinge uses durable non-asbestos fiber (NAF) gaskets, compatible with both 3/8" and 1/2" (10 mm and 12 mm) monolithic tempered glass. This material adapts to help maintain a consistent grip between the hinge and glass across varying surface conditions.
STANDARD REVERSIBLE PIVOT PIN: Each Trento Hinge contains a Reversible Pivot Pin. The standard reversible pivot pin allows you to adjust the door s closed position. By rotating (not flipping) the pin, you can shift the self-centering angle by 5 degrees either 95 degree or 85 degree to ensure the door closes properly and aligns correctly with surrounding panels. This adjustment helps maintain a tight seal and smooth operation.
Using two hinges with 3/8" and 1/2" (10 mm and 12 mm) glass, the hinge can support doors up to 150 lbs. (68 kg) with a maximum width of 40" (1016 mm).
Using three hinges with 3/8" and 1/2" (10 mm and 12 mm) glass, the hinge can support doors up to 190 lbs. (86 kg) for doors up to 40" (1016 mm) wide.
Product Warning:
CRL Shower Door Hinges are designed for residential or commercial shower use. If hinges are to be used for other than their intended purpose, approval must be obtained from the CRL Shower Door Technical Sales Department.
Use only the template included with this hinge. Cut-out dimensions for CRL hinges may not match those of other brands.
Most shipping weights are approximate and have not been verified. If the exact weight is needed in order to determine shipping costs, and shipping costs are required in order for you to complete your order, please request this prior to submitting your order by contacting CRL Customer Service. Product images shown are of the actual product or a close representation. Colors can vary depending on your computer's video card and on how your monitor's color is adjusted.
Back to Top