RECENTLY VIEWED
Skip to main content
Devices are BHMA Certified to ANSI/BHMA A156.3 (2001) Grade 1 for Exit Devices. Devices are UL and cUL Listed as “Panic Hardware” (UL 305) and as “Fire Exit Hardware” (UL 10C). The QEL Conversion Kit is UL Classified under “Accessories for Single-Point Locks and Latches and Fire Exit Hardware” (UL 10C). QEL electrical load: QEL wire run lengths: Distance (one way) The QEL has a low in rush current = 1.0 amps, so it can be used with standard Schlage power supplies. When powering multiple components, verify that the amperage requirements of all components combined does not exceed the power supply output rating, see table below for output ratings. Schlage PS902: up to 2 amps. Schlage PS904: up to 4 amps. Schlage PS906: up to 6 amps.
DK Hardware Professional Tax Exempt? Net 30? - DK Net Terms
Roll over image to zoom in
Product Features
Product Overview
Related Videos
Reviews
Questions & Answers
Von Duprin 041163 QELX (Quiet Electric Latch Retraction) for AX Modular Conversion Kit with Allegion Connector, Fits 3ft and 4ft 33/35A and 98/99 Series Devices
Item #: 041163 by Von Duprin
See reviewsSee reviews
30 Days Easy Return. We are the largest supplier of the most adaptable, personalized hardware in the industry. We work hard to ensure you're satisfied with our products.
Features
Alternate Part Number-1
178073
For Use With
33A/35A; 98/99 Series Exit Device
Function
Conversion Kit
ADA Compliant
No
Standards
ADA 2010
Function Family
Part/Component
Features
EL Conversion Recommended When Upgrading Von Duprin Solenoid-Driven Latch Retraction; For 3 ft Device
Product Type
Exit Device Part/Accessory
Series
Parts/Accessories
Manufacturer Parent
Allegion
Sub-Series
041163
Use With
Exit Device
No of inners
1
Manufacturer Warranty
Limited 5 Year Mechanical and 2 Year Electro Mechanical Warranty
Hazardous Material
No
Product Overview
Von Duprin Quiet Electric Latch Retraction (QEL)
The device provides electronic control of an exit device for environments where limited operational noise is desired. The QEL option is Von Duprin’s solution of choice for hospitals, libraries, museums and theaters where ambient noise can be disruptive. It is available on all Von Duprin 98/99, 94/95 and 33A/35A series exit devices. These devices always provide mechanical egress. The electrified latch retraction can also be activated by an access system or building automation system to unlatch the exit device momentarily. Often the QEL is used with a credential reader and access control system to unlock the door momentarily for authorized users. It can also be configured to electronically retract the latch for an extended period of time to allow free entry. This is a convenient alternative to mechanical dogging. If manual dogging is required, the hex dogging option is available, to order specify HD-QEL. Special center case dogging is also available for 98/99 rim and vertical systems, specify SD-QEL. The QEL option is available on panic devices and fire rated devices. Fire rated openings have several additional requirements. They must be self latching and self closing. To satisfy these requirements the QEL must be paired with an automatic operator and under the control of an automatic fire alarm system when used on fire rated openings.
Specifications:
- Voltage: 24 VDC.
- Current: 1.0 A Inrush (0.5 sec); 0.14 A Holding.
- 200' - 18 AWG Wire gauge.
- 320' - 16 AWG Wire gauge.
- 500' - 14 AWG Wire gauge.
- 800' - 12 AWG Wire gauge.
Accessories:
Compatibility:
The QEL device is compatible with the following equipment: PS900 Series power supplies - PS902, 904, 906, 914; 900 Series Option Boards - 900-2RS, 900-4R, 900-4RL, 900-2Q; PS873 Power Supply including 871-2, 871-2Q, 873-4TD/AO Option Boards. The power transfer is also sold separately. Please refer to Von Duprin catalog for more information on EPT-2/EPT-10 power transfers and PS900 series power supplies.