Skip to main content
Gas Detector Alarm, 10 ft, LED Display, 85 dB, Alarm: Audio, Electrochemical, Ionization Sensor White

Roll over image to zoom in

Kidde 900-0119 Gas Detector Alarm, 10 ft, LED Display, 85 dB, Alarm: Audio, Electrochemical, Ionization Sensor White

Item #: 900-0119 by KIDDE CANADA

UPC #: 047871101191

Item Discontinued!
See reviewsSee reviews
See reviews summary

The item is currently out of stock and it may or may not be restocked
OUT OF STOCK

Shop with Confidence

30 Days Easy Return. We are the largest supplier of the most adaptable, personalized hardware in the industry. We work hard to ensure you're satisfied with our products.

Features
  • Combined carbon monoxide and smoke alarm a single unit can be installed where previously, two were needed, reducing installation time
  • Intelligent sensor technology combines the detection capabilities of an ionization smoke sensor with that of an electrochemical carbon monoxide sensor
  • Voice warning announces the hazard type detected in English and French
  • 120 V interconnectable will interconnect with up to 24 other devices (18 of which can be initiating), including smoke alarms (limit of 12), CO and heat alarms
  • AA front loading battery backup change batteries without the need to remove the unit from the ceiling, providing continuous protection in the case of a power outage
  • Tamper-resistant unit will lock to mounting bracket to deter theft or tampering
  • End of life notification, ten years after unit is first powered, this alarm will beep two times every 30 secs to indicate it is time to replace the alarm
  • Green LED will flash every second during alarm and when the alarm condition goes away, the originating alarm unit will flash the green LED every 16 secs until the test/reset button is pressed
  • Test feature tests the alarm circuitry and triggers the voice announcement
  • Hush® feature temporarily silences nuisance alarms for approximately 9 min (will announce "hush mode activated," or "hush mode cancelled")

Mounting Type

Bracket

Dimensions

12.3 cm Dia x 3.2 cm D

Warranty

10 year limited

Color

White

Operating Temperature

4.4 to 37.8 deg C

Measuring Range

10 ft

Power Supply

120 V

Sound Level

85 dB

Nomenclature

900-0119 WIRE-IN ALARM/SMOKE/C

Product Overview
ALRM SMK & CRBN MONOXIDE WHT

The Kidde KN-COSM-IBACA uses breakthrough technology to offer a fast response to real fires, including smoldering and fast flaming, as well as protect you from carbon monoxide and dramatically reduce the chance of nuisance alarms. The Intelligent sensor technology combines the detection capabilities of an ionization smoke sensor which is more likely to detect smaller, less visible fire particles, like those produced by flaming fires with that of an electrochemical sensor, which is used to detect CO. Since carbon monoxide is present in all fires, having both detection chambers work together in one alarm is a breakthrough in the fire safety industry. When either sensor notices a potential hazard, it will communicate with the other. Depending on what is detected, the alarm will adjust its smoke sensitivity in order to better discriminate between a real hazard and a false one. This constant communication enhances the alarm's overall performance in all fires and significantly reduces the potential for a nuisance alarm. Leading authorities recommend that both ionization and photoelectric smoke alarms be installed to help insure maximum detection of the various types of fires that can occur within the home. Ionization sensing alarms may detect invisible fire particles (associated with fast flaming fires) sooner than photoelectric alarms. Photoelectric sensing alarms may detect visible fire particles (associated with slow smoldering fires) sooner than ionization alarms.