
DK Hardware 2025-06-09 – 19:10:18
Installing the Fluidmaster 7530P8 Better Than Wax Universal Wax-Free Toilet Seal is refreshingly mess-free compared to traditional wax rings. Here’s a quick step-by-step guide:
1 - Turn off the water supply and flush the toilet to empty the tank and bowl.
2 - Disconnect the water line and remove the toilet by unscrewing the floor bolts.
3 - Clean the flange area thoroughly—remove any old wax or debris.
4 - Insert new flange bolts (included) and secure them with plastic washers.
5 - Stack the seal and spacers based on your flange height:
- If the flange is at or above floor level, use just the seal.
- If it’s below floor level, add the included spacer(s) to raise the seal.
6 - Place the seal over the flange, aligning it with the bolts.
7 - Lower the toilet onto the seal, making sure the bolts go through the holes.
8 - Tighten the nuts evenly, cut excess bolt length, and cap them.
9 - Reconnect the water supply, turn it on, and test for leaks.
Want to see it in action? This official Fluidmaster video walks you through the whole process in under 5 minutes - https://www.youtube.com/watch?v=TAEwudpeQFo