Skip to main content
Heavy Duty Floor Closer 3/4" Offset. Right Handed, Single Acting. Exterior or Interior Doors up to 450lbs, up to 48". Satin Chrome

Roll over image to zoom in

Rixson 2790S-HO-626-RHClick To Copy Heavy Duty Floor Closer 3/4" Offset. Right Handed, Single Acting. Exterior or Interior Doors up to 450lbs, up to 48". Satin Chrome

Item #: 2790S-HO-626-RH by Rixson

See reviewsSee reviews
In Stock

$1,800.54

/each
SAVE UP TO 180.05

Buying in bulk

QUICK SHIPPING*Usually ships in 1 business dayIn stock: 11 units available
QTY
+
+ Add to Wishlist
Buy in Bulk & Save - See How Watch Now

Shop with Confidence

30 Days Easy Return. We are the largest supplier of the most adaptable, personalized hardware in the industry. We work hard to ensure you're satisfied with our products.

Features

Handing

Right Hand

Closer Type

Concealed, Floor, Mechanical

Maximum Opening

90°

Alternate Part Number-1

143331

Arm Function

Hold Open

Product Overview

RIXON 27 Series Heavy Duty Offset Floor Closer

Product Description & Features

  • Built-in positive dead stop prevents door from swinging beyond the desired opening degree (specify 85-deg, 90-deg, 95-deg, 105-deg)
  • Separate and independent valves for closing speed, latch speed and backcheck
  • Available non-hold open (N) or selective hold open (S) at same degree as dead stop
  • Delayed action option-prefix "DA" (Non-hold open closers only)
  • Models available to meet ICC/ANSI A117.1 low opening force requirements, prefix "PH". (For 8-1/2 lbs. of opening force prefix PH and suffix 8-1/2 lbs.)
  • Cold weather fluid available – specify "CWF" (not available for closers with "DA")
  • Sealed closer option – specify "SC"
  • Available with floor plate or threshold installation (floor plate shown)
  • Available 1-1/2" offset, for doors with 3/4" cladding or frames with applied molding, maximum door weight 250 lbs.
  • Cycolac, rust-proof cement case
  • Vertical door adjustment
  • Standard top pivot: #180 included
  • For arch top doors or applications when the 180 top pivot cannot be used, supply at least two each M190 load-bearing intermediate pivots, mounted together at the top of the straight vertical edge
  • Intermediate pivot(s) required: M19 (order separately)
  • Doors 60" (1524mm) to 90" (2286mm) in height should use one intermediate pivot. Each additional 30" (762mm) warrants another intermediate pivot
  • For fire rated openings (up to 3 hour assemblies) prefix "F". This package will be supplied with a steel top pivot (F180) and a non-hold open closer. Intermediate pivot required: FM19 (order separately)
  • UL listed closers cannot have PH option
  • For 20-minute labeled doors suffix "-20" to the part number
  • Furnished with wood and machine screws
  • Extended spindles available in 1/2" increments up to 2" longer than standard
  • APPLICATIONS

  • Single Acting, Handed
  • Exterior or Interior Doors
  • Weight to 450 lbs.
  • Door Width up to 4'0" (1219mm)
  • SERIES OPTIONS

  • Sealed Closer – Prefix SC
    This option for exterior doors or interior doors, with heavy exposure to water or cleaning solvents, protects the body. The closer body is placed in the cement case. A stainless steel cover plate is then gasketed and fastened to the cement case. This must be ordered with closer and cannot be ordered less the cement case.

  • Delayed Action – Prefix DA
    After full open, permits door to remain ajar (at 70 degrees) for up to 40 seconds. Operates by separate valve and can be shut off if not needed. Not available on closers with hold open feature.

  • Physically Handicapped – Prefix PH
    To comply with ICC/ANSI A117.1 established by the Americans with Disabilities Act. PH prefix indicates 5 pounds of opening force, based at 30"" from centerline of pivot. PH closers may not be used on labeled fire doors or exterior doors. Rixson accepts no responsibility for PH closers and door latching. Also, be advised that ADA guidelines DO NOT apply to fire rated openings or exterior doors.

  • Wood Door – Prefix W
    When using a center hung product with the centering arm (e.g. 28, 30 or 40) a special plate and less obtrusive adjusting screws are needed for wood doors. This plate is reinforcement to the deep mortise required for that arm, protecting veneer.

  • Fire Rated – Prefix F
    Closer packages for fire rated doors(up to 3 hours) include a steel top pivot and must have additional steel intermediate pivots. These closers are non-hold open.

  • Twenty Minute Label – Suffix -20
    This UL rating is for 20 minute doors. Pivots are brass base materialand include a visible label.

  • 8-1/2 Lbs. Opening Force – Prefix PH Suffix 8-1/2
    This is a lighter than normal opening force. Be aware that this may not be strong enough to close fire rated or exterior doors. Rixson accepts no responsibility for PH closers and door latching. Also, be advised that ADA guidelines DO NOT apply to fire rated openings or exterior doors.

  • Less All Parts – Suffix LAP
    If a closer is needed for replacement, the arm, cover, cement case, top pivot and floor plate are omitted.

  • Less Floor Plate – Suffix LFP
    When thresholds or cover pans are being used, the closer doesn't need the decorative floor plate.

  • Less Cement Case – Suffix LCC
    For existing installations or when cement case has been sent earlier in construction. Closer will be packaged without the cement case.

  • Less Top Pivot – Suffix LTP
    For unusual head conditions, where the top pivot cannot be used, the closer is shipped without the top pivot. For offset installations, an additional load bearing intermediate (side jamb) M190 pivot is required. All intermediate pivots for that opening should be M190's, not M19's

  • Degree of Swing – Follows Model Number
    Single acting heavy-duty floor closers have a deadstop. This means that the door cannot go past a certain point. If ordered as a hold open closer, the hold open position is exactly the same as the deadstop. The degrees available are 85°, 90°, 95° or 105° (180° for model 27 only). It is recommended that the maximum degree of swing be ordered.
    * Double acting closers have a deadstop at 103° and are available with hold open options at 90° or 100°.

  • Non Hold Open – Suffix N
    These closers do not hold the door open. This feature cannot be changed in the field.

  • Automatic Hold Open – Suffix A
    These closers hold the door open. This feature cannot be changed in the field. Models 27-180, 30 & 40 only.

  • Selective Hold Open – Suffix S
    These closers can be set to hold open or non-hold open. This is done via a screw control on the top of the closer. Available on Models 27 and 28 only.

  • Hand- Suffix RH or LH
    All single acting floor closers are handed. All double acting floor closers (30, 40, H40) are non-handed.